BRANDTitleOverviewINFO
1. Primer - Vosschemie® G4 Primer

The Foundation of a Perfect Pool.

The first layer in our 3-coating system is the Vosschemie® G4 Primer, which prepares your pool's surface for a strong, lasting bond for the next layers.

Purpose: Acts as the bonding layer between the pool surface and subsequent coatings.
Properties: G4 primer provides a strong adhesive base, ensuring that the tie-coat adheres properly to the pool surface.
Application: Apply the G4 primer directly to a clean and prepared pool surface.

READ MORE
2. Tiecoat - Crystic® 233PA

The Ultimate Adhesion.

Our tiecoat ensures ultimate adhesion between the topcoat and the prime coat, providing superior protection and making your pond resistant to wear and environmental changes.

Purpose: The tiecoat provides durable protection against environmental stress.
Properties: Isophthalic Pond Resin resists temperature changes, provides additional adhesion, and creates an extra base for the topcoat.
Application: Once the primer is dry, apply the tiecoat evenly for lasting coverage.

READ MORE
3. Topcoat - Crystic® 508PA

The Perfect Finish.

Crystic® 508PA Topcoat provides a semi glossy, sleek finish and extra protection, keeping your pool aesthetically pleasing and waterproof.

Purpose: The final coating that enhances the pool’s appearance and adds extra protection.
Properties: 508PA Topcoat provides a tough, waterproof seal with a semi-glossy, smooth finish, utilizing ISO NPG resin for superior chemical resistance, durability, and UV resistance.
Application: Apply the Topcoat as the final layer once the basecoat is set for both protection and aesthetic enhancement.

READ MORE
Abranet® Dust-Free Sanding Strips - Long

The original, multi-functional net sanding material, Abranet® combines high performance and a longer lifespan than traditional abrasives, making it a cost-effective solution. Designed for dry sanding by machine or by hand, its true dust‐free sanding characteristics result in a cleaner work environment, as well as a better surface finish.

READ MORE
Abranet® Dust-Free Sanding Strips - Short

Designed for dry sanding by machine or by hand, its true dust‐free sanding characteristics result in a cleaner work environment, as well as a better surface finish.

READ MORE
Abranet® NC (Non-Corrosion)Dust-Free Sanding Disc

Designed for dry sanding by machine or by hand, its true dust‐free sanding characteristics result in a cleaner work environment, as well as a better surface finish.

READ MORE
Abranet® Short Sanding Strip

Designed for dry sanding by machine or by hand, its true dust‐free sanding characteristics result in a cleaner work environment, as well as a better surface finish.

READ MORE
Accelerator G

Accelerator G is a specialized additive designed to enhance the curing speed of epoxy and polyester resins. This high-performance accelerator ensures efficient and rapid curing, making it ideal for time-sensitive projects and industrial applications, while maintaining the quality and integrity of the final product.

READ MORE
Accelerator VE

Accelerator VE is a high-performance additive designed to speed up the curing process of vinyl ester resins. This reliable accelerator enhances efficiency and reduces production time, making it ideal for a wide range of industrial and artistic applications.

READ MORE
Aluminium Oxide Resin Fibre Disc - 115mm

Used for efficient stock removal on all metals and welds in the industrial, automotive and composite market segments. Especially useful for grinding and finishing heavy metals, steel components and edges. For use on all electric and air grinders.

READ MORE
Aluminium Oxide Resin Fibre Disc - 180mm

Used for efficient stock removal on all metals and welds in the industrial, automotive and composite market segments. Especially useful for grinding and finishing heavy metals, steel components and edges. For use on all electric and air grinders.

READ MORE
Art Expoxy (1-2-1) - Part A & B

Art Epoxy (1-2-1) Casting Epoxy is a high-performance, crystal-clear resin perfect for creating stunning art pieces, jewelry, and intricate molds. This easy-to-use 1:1 mix ratio formula provides a durable, glossy finish that enhances the beauty and depth of your creations. Ideal for both beginners and experienced artists, Art Epoxy ensures a smooth, bubble-free application with exceptional clarity and strength.

READ MORE
Automotive Masking Tape 80º Natural Rubber Yellow

Saturated semi-crepe paper masking tape coated with a specially developed cross‐linked solvent-based natural rubber adhesive. Guaranteed for 60 minutes at 80°C. Also suitable for all general masking applications.

READ MORE
Biaxial Cloth 410G GSMREAD MORE
Biaxial Cloth 600G GSMREAD MORE
Biaxial Cloth 760G GSMREAD MORE
Biaxial Cloth 800G GSMREAD MORE
Cenolite 300 (Micro Balloons)READ MORE
Chemlease 15 Sealer

Chemlease 15 Sealer is a premium mold sealer developed to reduce mold porosity and provide an excellent base for your molds. Its advanced formulation ensures that your molds are conditioned and sealed to perfection, resulting in improved performance and longevity.

READ MORE
Chemlease Mould Cleaner

Chemlease Mold Cleaner MC-501 is a combination of powerful stripping agents and solvents which attack resinous buildup and removes it from molds. It is specially formulated to remove waxes, silicones, contaminants and resin buildup from molds, both during basic mold preparation and during regular on-line operations.

READ MORE
Chemlease PMR75 Release Agent

Chemlease PMR is a unique semi-permanent mold release system specifically designed for the polyester molding industry. Say goodbye to sticking issues and hello to seamless releases.

READ MORE
Chopped Strand Mat 225g

E-glass Chopped Strand Mats are non-woven fabrics consisting of randomly distributed chopped strands held together with a powder or emulsion binder.

Chopped Strand Mat is compatible with unsaturated polyester, vinyl ester, epoxy and phenolic resins.

The products are most widely used in hand lay-up process and can also be used in filament winding, Compression molding and continuous laminating processes. The typical end-use applications include various panels, boats, FRP roofing sheet, Autonitive parts, bathroom equipment and cooling towers.

READ MORE
Chopped Strand Mat 300g

E-glass Chopped Strand Mats are non-woven fabrics consisting of randomly distributed chopped strands held together with a powder or emulsion binder.

Chopped Strand Mat is compatible with unsaturated polyester, vinyl ester, epoxy and phenolic resins.

The products are most widely used in hand lay-up process and can also be used in filament winding, Compression molding and continuous laminating processes. The typical end-use applications include various panels, boats, FRP roofing sheet, Autonitive parts, bathroom equipment and cooling towers.

READ MORE
Chopped Strand Mat 450g

E-glass Chopped Strand Mats are non-woven fabrics consisting of randomly distributed chopped strands held together with a powder or emulsion binder.

Chopped Strand Mat is compatible with unsaturated polyester, vinyl ester, epoxy and phenolic resins.

The products are most widely used in hand lay-up process and can also be used in filament winding, Compression molding and continuous laminating processes. The typical end-use applications include various panels, boats, FRP roofing sheet, Autonitive parts, bathroom equipment and cooling towers.

READ MORE
Chopped Strand Mat 600g

E-glass Chopped Strand Mats are non-woven fabrics consisting of randomly distributed chopped strands held together with a powder or emulsion binder.

Chopped Strand Mat is compatible with unsaturated polyester, vinyl ester, epoxy and phenolic resins.

The products are most widely used in hand lay-up process and can also be used in filament winding, Compression molding and continuous laminating processes. The typical end-use applications include various panels, boats, FRP roofing sheet, Autonitive parts, bathroom equipment and cooling towers.

READ MORE
Clear Epoxy Laminating Set - UV Stable
  • Sicomin Surf Clear EVO epoxy system is specially formulated for the manufacturing of surf boards.
  • Surf Clear EVO is suitable for hand lay up of glass, carbon, aramid, natural and synthetic fibers.
  • Surf Clear EVO is compatible with all commercial foams: polystyrene, polyurethane, cross-linked &linear PVC foams and others.
  • Surf Clear EVO is compatible with all typical fillers used in the surf industry.
READ MORE
Crestabond® M1-05 Structural Adhesive

Crestabond M1-05 does not need the addition of any extra materials or processes, allowing for greater flexibility in design and an efficient assembly process.

This adhesive has good impact and fatigue resistance with excellent strength, making it perfect for use in demanding applications such as those within the industrial sector that may be subject to intense environmental conditions.

READ MORE
Crestabond® M1-20 Structural Adhesive

Part of the Crestabond family, M1-20 is a toughened, two component 10:1 acrylic adhesive, and is ideal for the bonding of composites, metals and thermoplastics.

READ MORE
Crestabond® M1-60HV/2 Structural Adhesive

Crestabond® M1-60HV/2 is a sandable toughened, two component 10:1 acrylic adhesive designed for bonding composites, thermoplastics and metals.

This new generation of structural methacrylate adhesive meets the bonding requirements of most assembly operations. Demonstrating excellent impact, peel, shear, compressive strength and fatigue resistance properties across all bonded parts.

With a working time of 50–70 Minutes, fixture time 110–140 minutes and a gap-filling capability of 1–50mm.

READ MORE
Crestafix® 621CC 85 Bonding Paste

Such applications include panels, inserts, internal frames, ribs, internal core materials, composite constructions and car body components. Crestafix 621CC 85 provides high shear-strength bonded joints without the need for mechanical fixings.

READ MORE
Crestamould® Gelcoat 12PA

Crestamould® Gelcoat 12PA is an Iso/NPG brush tooling gelcoat with good heat and chemical resistance so suitable for making moulds.

READ MORE
Crestamould® Gelcoat 15PA (B)

Crestamould is easy to apply and achieves good coverage. There is no gassing of the gelcoat ensuring a very low porosity surface. It cures with a standard MEKP catalyst.  Crestamould Gelcoat 15PA (B) has excellent resistance to fibre print through when used with Crestamould VE679PA skincoat, Crestamould RTR4010PA or Crestamould Resin 474PA.

READ MORE
Crestamould® Gelcoat 15PA (S)

Crestamould Gelcoat 15PA (S) is a superior performance vinylester spray tooling gelcoat. It is used for making moulds designed to have a long service lifetime and retain high gloss levels after multiple pulls.

Crestamould Gelcoat 15PA (S) is easy to spray and achieve good coverage. There is no gassing of the gelcoat ensuring a very low porosity surface. It cures with a standard MEKP catalyst. Crestamould Gelcoat 15PA (S) has excellent resistance to fibre print through when used with Crestamould VE679PA skincoat, Crestamould RTR4010PA or Crestamould 474PA.

READ MORE
Crestamould® Rapid Tooling Resin 4010PA

Crestamould RTR 4010PA is a thixotropic, filled, low profile resin for hand-lay mould making applications.

Crestamould RTR 4010PA helps to achieve faster mould making and eliminates surface distortion, forming part of our new mould making system, which also comprises of

 

READ MORE
Crestapol® 1210

Crestapol 1210 is a low viscosity resin suitable for use in closed mould processes. It has excellent toughness and can be highly filled with additives such as alumina trihydrate and calcium carbonate. It is not advised for use in open mould applications.

READ MORE
Crestapol® 1260

Crestapol 1260 is a urethane acrylate resin with low viscosity, suitable for infusion and resin transfer moulding (RTM) at vacuum levels down to -1.0 Bar. This resin is compatible with carbon fibre reinforcement materials and sizing agents, has high-temperature performance, high strength and toughness, and exceptional water and hydrolysis resistance.

READ MORE
Crestomer® 1152PA Structural Adhesive

Crestomer 1152PA is a pre-accelerated two-part structural adhesive based on unsaturated urethane acrylate in a styrene monomer. Crestomer 1152PA adhesive has excellent fatigue and impact resistance as well as reduced styrene emissions.

READ MORE
Crystic 233 PA - Laminating Resin

Crustic 233 PA ISO Laminating Resin is a high-performance, unsaturated polyester resin designed for laminating applications. It offers excellent adhesion and mechanical properties, making it ideal for creating durable, strong laminates.

This ISO-grade resin is resistant to corrosion and chemical exposure, ensuring long-lasting performance in a variety of environments.

It is typically used in industries like marine, automotive, and construction, where the need for robust, high-strength composite materials is essential. The resin is easy to apply and cures efficiently, making it a reliable choice for both professionals and manufacturers.

READ MORE
Crystic 783 LVLR Infusion Isophthalic Resin

Crystic 783 LVLR Infusion ISO Resin is a low-viscosity, low-styrene, isophthalic polyester resin formulated for infusion processes. It is designed for use in composite manufacturing, offering excellent mechanical strength and resistance to chemicals and water.

Crystic 783 LVLR is ideal for producing high-performance laminates, especially in industries like marine, automotive, and industrial applications.

Its optimized infusion properties ensure efficient wet-out of reinforcement materials, while the isophthalic base provides enhanced durability and long-term stability. This resin is suitable for use where high strength, reliability, and resistance to harsh environments are required.

READ MORE
Crystic® Brush Gelcoat 69PA

Crystic® Gelcoat 69PA has been developed to have exceptional water and chemical resistance. Crystic® Gelcoat 69PA is recommended for use in sanitaryware and chemical containment applications. Crystic® Gelcoat 69PA is approved by Lloyd’s Register of Shipping.

READ MORE
Crystic® Clear Brush Gelcoat 69PA

Crystic® Gelcoat 69PA is a pre-accelerated Iso-NPG gelcoat formulated for brush application. Crystic® Gelcoat 69PA has been developed to have exceptional water and chemical resistance. Crystic® Gelcoat 69PA is recommended for use in sanitaryware and chemical containment applications. Crystic® Gelcoat 69PA is approved by Lloyd’s Register of Shipping.

READ MORE
Crystic® Glosscoat Polyester Coating

Crystic Glosscoat material hardens rapidly and can be easily sanded to a smooth surface which can be polished to high gloss.

READ MORE
Crystic® Isophthalic Black Brush Gelcoat LS 88PA

Crystic Gelcoat LS 88PA is our best weathering isophthalic brush gelcoat. It exhibits low colour change and superior gloss retention compared to all other isophthalic competitive gelcoats tested. Can be used in all markets, has excellent water resistance and has Lloyds approval for the marine market.

READ MORE
Crystic® Isophthalic Clear Brush Gelcoat LS 88PA

Crystic Gelcoat LS 88PA is our best weathering isophthalic brush gelcoat. It exhibits low colour change and superior gloss retention compared to all other isophthalic competitive gelcoats tested. Can be used in all markets, has excellent water resistance and has Lloyds approval for the marine market.

READ MORE
Crystic® Isophthalic White Brush Gelcoat LS 88PA

Crystic Gelcoat LS 88PA is our best weathering isophthalic brush gelcoat. It exhibits low colour change and superior gloss retention compared to all other isophthalic competitive gelcoats tested. Can be used in all markets, has excellent water resistance and has Lloyds approval for the marine market.

READ MORE
Crystic® Isophthalic White Brush Gelcoat LS 88PA

Crystic Gelcoat LS 88PA is our best weathering isophthalic brush gelcoat. It exhibits low colour change and superior gloss retention compared to all other isophthalic competitive gelcoats tested. Can be used in all markets, has excellent water resistance and has Lloyds approval for the marine market.

READ MORE
Crystic® Isopthalic Clear Spray Gelcoat LS 97PA

Crystic Gelcoat LS 97PA is our best weathering Isophthalic spray gelcoat. It exhibits low colour change and superior gloss retention compared to all other isophthalic competitive gelcoats tested. Can be used across all markets, has excellent water resistance and has Lloyds approval for the marine market.

READ MORE
Crystic® Isopthalic White Spray Gelcoat LS 97PA

Crystic Gelcoat LS 97PA is our best weathering Isophthalic spray gelcoat. It exhibits low colour change and superior gloss retention compared to all other isophthalic competitive gelcoats tested. Can be used across all markets, has excellent water resistance and has Lloyds approval for the marine market.

READ MORE
Crystic® Low Styrene Spray Gelcoat 253PA

Using this polyester technology with epoxy resin systems means that parts do not need to be post painted saving moulders extra processing time and costs. Crystic 253PA can be backed up rapidly, has good u.v. resistance and is easy to repair.

READ MORE
Crystic® Polyester Resin 125PA

Crystic 125PA is a quality orthophthalic based unsaturated polyester resin developed specifically for the manufacture of GRP mouldings.

Crystic 125PA is a polyester resin of medium viscosity which meets the requirements of BS3532 : 1990, as a Type “A” resin. It can also be used for flat surface laminations. Laminates made with Crystic 125PA have good mechanical strength, high rigidity and impact resistance, and excellent
dimensional stability. Its curing properties make it especially suitable for fast production processes when used with the recommended curing system.

READ MORE
Crystic® Polyester Resin 491PAT

Crystic® 491PAT is a versatile pre-accelerated unsaturated polyester resin with good water and chemical resistant properties. Crystic® 491PAT was developed for use in a wide range of critical applications which require toughness combined with water and chemical resistance. Crystic® 491PAT is thixotropic and can be applied by either brush or spray equipment and may also be used in the pultrusion process for the production of profile sections.  Crystic® 491PAT is suitable for the fabrication of high performance boat hulls destined for use in warm and tropical waters.

READ MORE
Crystic® Primecoat Polyester Coating

Crystic Primecoat can be applied wet-on-wet up to a thickness of 1.5mm in one operation without sagging or draining from vertical surfaces. The material hardens rapidly and when cured can be easily sanded to a very smooth finish which can be polished to a surface glossy enough for many applications. Where higher gloss and/or hardness is required it can be surfaced with Crystic Glosscoat.

READ MORE
Crystic® Scottbond 117PA

Crystic® ScottBond 117PA has been shown to bond to most materials commonly used in the GRP industry but should be tested prior to use.

READ MORE
Crystic® Topcoat 508PA Clear (Natural)

Crystic Topcoat 508PA White is a pre-accelerated Topcoat with excellent water and weather resistance, designed for use in the marine and building industries. It is based on a high quality isophthalic-NPG polyester resin. It has been formulated for application by brush. It is pigmented using a highly UV resistant grade of titanium dioxide.

READ MORE
Crystic® Topcoat 508PA Pool Blue

Crystic Topcoat 508PA White is a pre-accelerated Topcoat with excellent water and weather resistance, designed for use in the marine and building industries. It is based on a high quality isophthalic-NPG polyester resin. It has been formulated for application by brush. It is pigmented using a highly UV resistant grade of titanium dioxide.

READ MORE
Crystic® Topcoat 508PA Sky Blue

Crystic Topcoat 508PA White is a pre-accelerated Topcoat with excellent water and weather resistance, designed for use in the marine and building industries. It is based on a high quality isophthalic-NPG polyester resin. It has been formulated for application by brush. It is pigmented using a highly UV resistant grade of titanium dioxide.

READ MORE
Crystic® Topcoat 508PA White

Crystic Topcoat 508PA White is a pre-accelerated Topcoat with excellent water and weather resistance, designed for use in the marine and building industries. It is based on a high quality isophthalic-NPG polyester resin. It has been formulated for application by brush. It is pigmented using a highly UV resistant grade of titanium dioxide.

READ MORE
Crystic® Vinyl Ester Resin 679PA

Crystic® VE 679PA is a pre-accelerated, thixotropic, DCPD modified, vinyl ester resin.

Crystic® VE 679PA has been developed for use as a skin coat in marine and tooling applications. It has excellent blister resistance and significantly reduces the occurrence of print through, to produce durable mouldings with an enhanced surface finish.

READ MORE
Crystic® Vinyl Ester Resin VE671

Crystic Resin VE671 is a quick curing non accelerated and non thixotropic epoxy bisphenol vinylester resin with outstanding chemical resistance to a wide range of substances at room and elevated temperatures. Suitable for laminating and filament winding. It has Lloyds approval and can be used in Marine, Chemical resistant, Building and Construction, Industrial and Transportation applications.

READ MORE
Crystic® Vinyl Ester Resin Ve679-03PA

Crystic® Resin VE679-03PA is a pre-accelerated, DCPD modified, vinylester resin, developed for use as an infusion resin with a wide range of gel times dependant on catalyst type and level.

Crystic® Resin VE679-03PA has excellent blister resistance and significantly reduces the occurrence of print through.

READ MORE
Crystic® White Brush Gelcoat 69PA

Crystic® Gelcoat 69PA is a pre-accelerated Iso-NPG gelcoat formulated for brush application. Crystic® Gelcoat 69PA has been developed to have exceptional water and chemical resistance. Crystic® Gelcoat 69PA is recommended for use in sanitaryware and chemical containment applications. Crystic® Gelcoat 69PA is approved by Lloyd’s Register of Shipping.

READ MORE
Dianet Infusion Media

Knitted net bleeder with a very high porosity allowing good air and resin flow, is recommended for vacuum infusion technology with polyester, vinylester or epoxy resins.

Can be used in vacuum molding process for debulking of prepregs.

  • Recommended for very large part and high speed flow infusion.
  • Available in INFUPLEX version for easy implementation.
  • Heat-stabilized and de-oiled in order to avoid the rolling up of the flanges and contamination of the resin.
READ MORE
Diatex I-Connector 10mm

DIATEX offers a range of fittings, valves, adapters and consumable hoses for vacuum infusion.
This range of fittings and valves is available in several diameters to cover all needs.

READ MORE
Diatex Spiral Plug

To reduce leak risks and manufacturing costs, DIATEX developped a new range of connectors

READ MORE
Diatex T-Connector 10mm

DIATEX offers a range of fittings, valves, adapters and consumable hoses for vacuum infusion.
This range of fittings and valves is available in several diameters to cover all needs.

READ MORE
Diatex Breather Cloth 150g/m2

Products designed to drain air, solvents and pump excess resin during vacuum molding of composites.
100% non-woven polyester felts.

FR version (Fire Retardant) available for PES 150 and PES 340 to reduce the risk of fire in autoclave.

Suitable for complex shapes.
Good deformability.

READ MORE
Diatex Diabreaker

DIABREAKER is a vacuum line made of a non-woven polyester filled with thermoplastic microspheres, laminated with a release film, and holding a spiral tube which maintains the vacuum all along the product.

  • DIABREAKER avoids over-consumption of resin by slowing down the resin as soon as the flow front gets into contact with it, while keeping the resin moving forward, and maintaining a good vacuum level.
  • DIABREAKER allows to drain entrapped air bubbles, to get fully infused fibers,
  • Thanks to ELA20 release film, the product is easily peeled off from the part during demolding operation.
READ MORE
Diatex Diadrain

DIADRAIN is a flat resin or vacuum channel. It consists of a three-dimensional polyester filament core structure wrapped in a non woven polyester sleeve.

  • Works as resin supply channel or vacuum channel in vacuum infusion process.
  • Flexible. Easy to cut to size.
READ MORE
Diatex Diadrain MP

DIADRAIN MP is placed around the mold instead of the spiral pipe: when the resin reaches DIADRAIN MP, it is stopped meanwhile the gas is still eliminated from the laminate. DIADRAIN MP can also be set at any place on the laminate.

  • Very fast implementation of vacuum channels
  • Flexible.
    Easy to cut to size.
READ MORE
Diatex ELA20 P1 Release Film - Blue

Recommended for the vacuum molding (P3) or infusion
technology (P1) with polyester or epoxy resins.

Easy implementation.

Release film with all resins and elastomers.

READ MORE
Diatex Fogtac Green

Glue for vacuum infusion and RTM 

FOGTAC glue, intended for the vacuum infusion and RTM injection process, ensures perfect adhesion of the various reinforcements during draping.

It has a powerful bonding force which limits consumption.

Color: colorless

With its misting effect, the evaporation of solvents is facilitated and makes it possible to quickly obtain a tack on the surface of the reinforcements, while limiting the quantity deposited between the different layers.

FOGTAC glue does not interfere with resin flow and does not cause marking problems.

READ MORE
Diatex Infupeel®

The systems combine three vacuum consumables into a three-layer unit: a peel ply, a perforated film ELA20P0 permeable to resin and gases, a net bleeder on top.

There are 2 INFUPEEL versions, with 2 different peel ply :

  • INFUPEEL® DIANET PES90
  • INFUPEEL ®DIANET PA80

Used in manufacturing processes for vacuum infusion of composite materials.

De-oiled. Heat set. This easy-to-use solution eliminates the technical risk of overlap or of the omitted layer. Save time and optimise the production with INFUPEEL.

READ MORE
Diatex Infuplex

The systems combine two vacuum consumables into a two-layer unit (a perforated film and a net bleeder on top).

There are 7 INFUPLEX® versions with 5 different net bleeders.

INFUPLEX is also a very simple solution to lay up the bagging materials.

  • Used in manufacturing processes for vacuum infusion of composite materials.
  • De-oiled. Heat set.
READ MORE
Diatex Infusion Box 3/4 Thread - Omega Channel

DIATEX offers a range of fittings, valves, adapters and consumable hoses for vacuum infusion.
This range of fittings and valves is available in several diameters to cover all needs.

READ MORE
Diatex Infusion Box 85°c 25mm - Resin ProfileREAD MORE
Diatex Infusion Media Fastnet

This bleeder net / mesh has been designed for vacuum moulding and infusion of composites products.
The construction of this net allows a very fast flow of resin during infusion process : perfect for vacuum infusion of very large parts.

  • It allows productivity gain for the manufacturing of small and medium series.
  • Available in INFUPLEX version.
  • Neutral and self-release.
  • Compatible with polyester and epoxy resins.

Width: 1.4mm
Meters: Available in per meter or 100m

READ MORE
Diatex Infusion Media Flonet Yellow

This bleeder is recommended for vacuum infusion technology with polyester or epoxy resins.

Can be used in vacuum moulding process in order to precompact the prepregs.

  • Recommended for very large part.
  • Available in INFUPLEX version for easy implementation.
  • De-oiled in order to avoid contamination of the resin.

Width: 1.4mm
Meters: Available in per meter or 100m

READ MORE
Diatex Infusion Media ISONET

Technical net bleeder which has a balanced structure allowing similar air and resin flow in every direction, recommended for vacuum infusion technology with polyester or epoxy resins.

ISONET can be used in the vacuum moulding process in order to precompact the prepregs.

  • Available in INFUPLEX version for easy implementation
  • Good elongation
  • This net is heat-setted in order to avoid the rolling
  • Up of the flanges

Width: 1.4mm
Meters: Available in per meter or 100m

READ MORE
Diatex Infusion Media OM70

Net bleeder with a high porosity allowing good air and resin flows, OM70 is recommended for vacuum or injection technologies with polyester or epoxy.

  • Available in INFUPLEX version for easy implementation.
  • This net is deoiling in order to avoid any contamination in the composite : no transfer.

Width: 1.4mm
Meters: Available in per meter or 100m

READ MORE
Diatex Infusion Plug

To reduce leak risks and manufacturing costs, DIATEX developped a new range of connectors : INFUSION PLUG.

READ MORE
Diatex Infusion Plug ECO

The Infusion Plug Eco range has been redesigned in an Eco-responsible and Economical way : Weight gain divided by 3.6 including wood load (reeds and vine shoots)

INFUSION PLUG Eco are specific connectors for DIADRAIN.

READ MORE
Diatex Infutac

INFUTAC is made for the assembly of dry reinforcements and vacuum devices in vacuum infusion and RTM processes.

  • Holding of hybrid materials
  • Optimal adhesion during the molding
  • Low drying shrinkage
  • Exact application thanks to ultrafine spraying and green tracer
  • High instantaneous adhesion

INFUTAC adhesive, made for vacuum infusion process, ensures a perfect tack of the reinforcements during the molding. The glue does not interfere on the surface quality and structural integrity.

READ MORE
Diatex Infutac - Green

INFUTAC is made for the assembly of dry reinforcements and vacuum devices in vacuum infusion and RTM processes.

  • Holding of hybrid materials
  • Optimal adhesion during the molding
  • Low drying shrinkage
  • Exact application thanks to ultrafine spraying and green tracer
  • High instantaneous adhesion

INFUTAC adhesive, made for vacuum infusion process, ensures a perfect tack of the reinforcements during the molding. The glue does not interfere on the surface quality and structural integrity.

READ MORE
Diatex K7666 63µ Flash Tape

Manufactured from polyester film, coated with high performance silicone adhesive, K7666 pressure sensitive tapes are used for multi-purpose functions: holding down vacuum bagging materials, thermocouple wires, masking-off and protection.

  • Can be used in a range of applications including vacuum moulding or vacuum infusion, in oven or autoclave.
  • Good chemical resistance.
READ MORE
Diatex L-Connector 10mm

DIATEX offers a range of fittings, valves, adapters and consumable hoses for vacuum infusion.
This range of fittings and valves is available in several diameters to cover all needs.

READ MORE
Diatex LDPE Pipe 10/12mm

Diameter (Internal): 10 mm
Diameter (External): 12 mm
Length: 100 ml
Temperature: max. 75°C
Material: PEBD
Information: Can be used as resin distributor or vacuum line.

READ MORE
Diatex Megatac

MEGATAC adhesive is made for the assembly of dry reinforcements and vacuum devices in vacuum infusion and RTM processes. The glue has a powerful bonding force.
The high adhesive strength of MEGATAC glue allows the application of numerous fabrics and cores (foam, balsa wood…).

ADVANTAGES :

  • Available in spray : WEB type spraying, low volatility.
  • Powerful bonding force
  1. No degradation/alteration of the glue due to freezing.
  2. Heat the glue to room temperature before use.
  3. Do not place/store the glue cans on the floor with temperatures below 15°C.
READ MORE
Diatex PA80 Nylon Peel Ply

High tenacity standard peel ply and economic made by DIATEX designed to be used on epoxy and polyester composite systems.

The fabric leaves a fine surface impression for priming and secondary bonding.

For phenolic systems, use the polyester version DIATEX PES90.

  • Adhesive version (PA80AD) available for RTM and Infusion processes.
  • Easy removal.
  • There is no release agent or silicon in the fabric so there is no contamination.
  • 1M X 100M
READ MORE
Diatex PES90 Polyester Peel Ply

High tenacity standard and economic peel ply designed to be used with epoxy, phenolic and polyester composite systems. The high tenacity fabric leaves a rough surface impression for priming and secondary bonding. PES 90 is a synthetic fiber that offers a peel ply surface free from contamination

  • Its porosity allows a good migration of the exceeding resin to the breather/bleeder.
  • Available in full width or bands.
  • Scoured. Heat-setted.
  • No release agent or silicon in the fabric.
READ MORE
Diatex Plastic Gun - Spray AdhesiveREAD MORE
Diatex PO120 75µ 120°C Bagging Film

Extra large extruded advanced copolymer vacuum film.
This film behaves 3 layers: 2 auto-release copolymer layers and one polyamide layer in the middle.

  • Can be used for either vacuum moulding or vacuum infusion technologies. PO120 allows the moulding of complex forms.
  • Exceptional conformable characteristics.
  • Can be used in direct contact to the resin.
  • Styrene resistant film.
  • Non porous.
READ MORE
Diatex PO120 80µ 120°C Bagging Film

Extra large extruded advanced copolymer vacuum film.
This film behaves 3 layers: 2 auto-release copolymer layers and one polyamide layer in the middle.

  • Can be used for either vacuum moulding or vacuum infusion technologies. PO120 allows the moulding of complex forms.
  • Exceptional conformable characteristics.
  • Can be used in direct contact to the resin.
  • Styrene resistant film.
  • Non porous.
READ MORE
Diatex Sealant Tape LSM4000 140°C

Polyvalent sealant tape recommended for room temperature applications and able to undergo exothermic temperature up to 140°C.

  • Economic and ideal for use on metallic composite tools.
  • Especially developed for wind blade producers working in high humidity and high temperature environment.
  • Easy to release from the tools once the mould has cooled down to room temperature.
  • No contamination on the mould surface.
READ MORE
Diatex Spiral Plug ECO

The SPIRALPLUG Eco range has been re-designed with an Eco-responsible and Economical approach:

  • 80% less plastic used compared to a traditional connector
  • Addition of fillers of vegetable origin (reed; vine shoots)

SPIRALPLUG Eco are specific connectors for vacuum or resin.

With their Ω shape, they can be clipped directly onto adapted spiral tubes.

In the upper part, their internal conical shapes allow an easy insertion and a good tightening to facilitate the installation of the consumables.

READ MORE
Diatex Spiral Tube MP

SPIRAL MP is a microporous vacuum channel used for vacuum infusion parts manufacturing. SPIRAL MP is made of a spiral tube wrapped in the PES90MP microporous peel ply. To reduce marking, you can use the

SPIRAL MP is a microporous vacuum channel used for vacuum infusion parts manufacturing. SPIRAL MP is made of a spiral tube wrapped in the PES90MP microporous peel ply. To reduce marking, you can use the microporous DIADRAIN MP.

Very fast implementation of vacuum channels
Very flexible. Easy to cut to size.

  • Very fast implementation of vacuum channels
  • Very flexible. Easy to cut to size.
READ MORE
Diatex Spiral Tubing 10/12READ MORE
Diatex Vacuum & Resin Profile 5cm - 2mREAD MORE
Diatex Valve - 10mm

DIATEX offers a range of fittings, valves, adapters and consumable hoses for vacuum infusion.
This range of fittings and valves is available in several diameters to cover all needs.

READ MORE
Dimethyl Aniline (DMA)

Dimethyl Aniline (DMA) is a versatile chemical additive used as an accelerator in the polymerization of resins, particularly in the production of fiberglass-reinforced plastics. Supplied in a 500g & 4kg container, DMA ensures efficient curing and improved performance of your resin-based applications. Ideal for both industrial and specialized projects, this high-quality additive provides reliable and consistent results.

READ MORE
Duerf RSB139

The use of RSB139 does not compromise the thermosetting of resin or its structural integrity. It finds application in various fields, including the positioning of fiberglass, carbon, kevlar, and other fabrics, as well as foams like PU, PVC, PET, and more. RSB139 enables the positioning of multiple layers of fabrics and foams in different orientations, including horizontally, vertically, and upside-down, even accommodating different types of foams and plywood. Additionally, it facilitates the positioning of fabrics with different plastic films and aids in blocking fabric textures to streamline cutting operations.

READ MORE
Economy W/D Waterpaper Sanding Sheet

Our wet and dry water paper sheets are designed for sanding applications that demand finer grit as well as gentler sanding than normal, for example, auto body wet sanding and paint finishing. It effectively removes orange peel and scratch patterns. Combines hard-wearing waterproof A‐weight backing paper and silicone carbide coating for extreme efficiency.

READ MORE
Economy Wet And Dry Waterpaper Sanding Sheet

It effectively removes orange peel and scratch patterns. Combines hard-wearing waterproof A‐weight backing paper and silicone carbide coating for extreme efficiency.

READ MORE
Ecowet Water Paper Sanding Sheet

EcoWet is ideal for the manual, wet sanding of painted surfaces between coats, as well as for fixing defects in the paint. EcoWet is also well suited for the removal of orange peel structure and spot mark repair. The use of a sanding block is recommended to obtain a smooth, even surface, with a consistent sanding pattern.

READ MORE
Efficiency Aluminium Oxide Flap Disc, Angled

These discs are very versatile and extremely well-priced. Our flap discs boast extremely high stock removal qualities, with long life and excellent cutting abilities, while remaining cool and providing the operator with the required finish every time.

READ MORE
Epoxy Laminating Hardner Part B (F205)

EPIKURE Curing agent F205 is a low viscosity, modified cycloaliphatic amine curing agent.

EPIKURE F205 is used in the formulation of room temperature curing compositions such as industrial floorings, tank linings, solvent-free
coatings, concrete adhesives, etc.

Benefits

  • Low viscosity
  • Excellent surface appearance
  • Good blush resistance
  • Imparts good mechanical performance
READ MORE
Epoxy Laminating Resin Part A (862)

Epoxy Laminating Hardener Resin 862 - Part A is a high-quality resin designed for laminating applications. When combined with Part B, it creates a strong, durable, and clear epoxy suitable for various industrial and artistic projects. Easy to mix and apply, Part A ensures excellent adhesion and a smooth finish, enhancing the structural integrity and appearance of your laminates.

READ MORE
Fumed Silica

Synthetic, hydrophilic, amorphous silica, produced via flame hydrolysis. Standard product for industrial applications.

READ MORE
G4 Extra Primer, Bonding Agent And Sealant

G4 is a one component polyurethane resin that contains solvents. It is applied in thin coatings, hardens by the release of solvents and cross links with the moisture in the air. It has a highly abrasion resistant gloss surface. G4 has a brown translucent colour and is not resistant to UV light, it will yellow over a period of time when exposed to sunlight. G4 has excellent adhesion to wood and metal provided the surface is grease and oil free, clean, porous and dry. Metal surfaces should be thoroughly sanded. G4 cannot be applied to bitumen or other coatings that are not solvent resistant.

READ MORE
G8 Non-Slip Granulate
G8 Non-Slip Granulate is a one component, practically non yellowing polyurethane coating that contains solvents. However, it does not contain an additional UV light absorber. G8 Non-Granulate is applied in thin layers and hardens with moisture after the solvent is released. It has good resistance to all the usual chemicals and cleaners. G8 Non-Granulate should not be used indoors due to its solvent content.
READ MORE
G8 Super Clear Polyurethane Sealant
G8 Super is a one component, practically non yellowing polyurethane coating that contains solvents. However, it does not contain an additional UV light absorber. G8 Super is applied in thin layers and hardens with moisture after the solvent is released. It has good resistance to all the usual chemicals and cleaners. G8 Super should not be used indoors due to its solvent content.
READ MORE
Gold Freecut Sanding Sheets (50)

This durable, all-round sanding material is well suited for high-speed and hand-sanding in a multitude of applications. Gold features semi-open and special stearate coatings designed to prevent clogging, which helps achieve an optimal sanding result.

READ MORE
Gold Sanding Disks - Grip (6+1 HOLES)

This durable, all-around sanding material is well suited for high-speed and hand-sanding in a multitude of applications. Gold features semi-open and special stearate coatings designed to prevent clogging, which helps achieve an optimal sanding result.

READ MORE
Green Production Paper Roll

Suitable for both hand and light machine sanding, our green production paper has a combination of outstanding edge wear resistance and minimal clogging, resulting in a premium material that will last until the finish.

READ MORE
Green Production Paper Rolls

This robust green production paper achieves excellent results when it comes to sanding and stock removal. Suitable for both hand and light machine sanding, our green production paper has a combination of outstanding edge wear resistance and minimal clogging, resulting in a premium material that will last until the finish.

READ MORE
Knife Blade 10pk SK5 Blister TolsenREAD MORE
Kulubrite 10

Our Floated dry calcium carbonate products contained in our Kulubrite product range have been beneficiated through floatation resulting in a brighter, high purity calcium carbonate with particle sizes ranging from 45 micron down to 0.6 micron.

Our Kulucote product range consists of surface-treated Floated dry calcium carbonates. They are ultra-fine, white, stearic acid coated calcium carbonate powders with excellent dispersion properties which are used in the plastics, ink and paint industries.

READ MORE
Latex Gloves

Golden Hands™ Latex Examination Gloves made from premium grade natural rubber latex, with enhanced tactile sensitivity and suitable for extended wear.

READ MORE
Marbocote 227 CEE

Marbocote® 227CEE is designed to release all types of epoxy, phenolic, polyester (GRP) or vinyl ester resins from steel, aluminium or composite moulds. Marbocote 227CEE is an advanced polymeric resin in a non chlorinated organic solvent blend. Marbocote 227CEE is applied by a simple wipe-on technique; there is no need for rubbing or polishing. The Marbocote 227CEE is durable and capable of giving many releases per application. It will not contaminate the released surface.

READ MORE
Marbocote MARFAN

High temperature liquid mold release wax suitable on all FRP tooling, metal and other hard surface molds.

Suggested use: Polyester, epoxy and Urethane resins open mold hand or spray lay up; Resin transfer/injection ( RTM/RIM) ; Vacuum bag and compression molding.

READ MORE
Marbocote PK4

Marbocote PK4 is ideally suited for applications where high slip is required such as releasing abrasive, complex or deep draft components. The product is easy and quick to apply and produces a durable film capable of giving many releases before re-application is necessary and will not contaminate the released surface.

Marbocote PK4 is an advanced polymeric resin in a non-chlorinated organic solvent blend.

READ MORE
Maximum Mold Release Wax V3.0

MIRACLE GLOSS® Maximum Mold Release Wax NO. 8 3.0 is the world's first non-flammable paste wax designed for Composites/FRP molding. It is a costly blend of imported waxes specially formulated to provide the maximum number of releases per application. Especially useful on plugs, new molds, and tooling.

Maximum Molding Temp 200°F / 93°C
NET WT 11 OZ. (311g)
Item No. M0811V3 12 per case

READ MORE
Micro TalcREAD MORE
Mirka File Board

The low profile and the durable construction provide good control over the sanding process. The handle enables a flexible and ergonomic grip. The performance is excellent in combination with Mirka® Net stripes. Mirka® Hand Sanding Blocks are specially designed for sanding by hand in combination with Mirka’s revolutionary net-sanding products, although they can also be used with other grip abrasives. To ensure dust-free sanding the hand sanding block simply needs to be connected by hose to a dust extraction system.

READ MORE
Mixing Cup – No Markings

These high-quality disposable mixing cups are used for the clean mixing of all paint materials, such as base paints, clear coats, fillers, etc. These cups have no markings for measuring.

READ MORE
Norox 925H

NOROX®MEKP-925H is specifically formulated to reduce gas generation in critical corrosion applications for vinyl ester resins in gel coats, barrier coatings, and corrosion resistant structures. The low hydrogen peroxide level in NOROX®MEKP-925H often requires that the resin promotion system be modified for some resins to obtain reasonable gel times.

READ MORE
Norox® PD40

Norox® PD 40 is a reliable, high-quality methyl ethyl ketone peroxide catalyst ideal for curing unsaturated polyester and vinyl ester resins. Supplied in a 500g & 25KG package, it ensures consistent, rapid curing and enhances the performance and durability of your composite materials. Perfect for both industrial and artistic applications, Norox® PD 40 delivers dependable results every time.

READ MORE
Norox®KP-9

NOROX®KP-9 is a methyl ethyl ketone peroxide in phlegmatiser for the curing of unsaturated polyester resins at ambient temperature in combination with cobalt accelerators.

READ MORE
Paint Roller Handle Extension Powder Coated 3mt + Adaptor TolsenREAD MORE
Q-Cel® Hollow Microspheres (Glass Bubbles)

Potters® Engineered Glass Materials (EGM) business works closely with customers to provide value-added performance additives that uniquely improve customer formulations by lowering cost and increasing performance.

Our microspheres serve as functional additives in industrial applications such as weight-reducing fillers in plastics, polymers, and automotive body putties, as extenders in adhesives and paints/coating formulations, sensitizers in industrial explosives, electromagnetic shielding for electronic parts, and abrasive applications for cleaning and peening metal surfaces.

READ MORE
Quadriaxial Cloth 1100G GSMREAD MORE
Quadriaxial Cloth 580G GSMREAD MORE
Quadriaxial Cloth 850G GSMREAD MORE
Ramwax Run In

Solvent based wax polish Contains 14% solids.

READ MORE
Ramwax Silicone Release

Solvent based wax polish Contains 17% solids.

READ MORE
Snap Off Blade 10 Pack (18mm)
  • 10pcs blade
  • Material: high quality tool steel
  • Packing: plastic box with color sticker
  • BLADE SIZE 18x100mm
READ MORE
Snap Off Knife
  • Stainless case
  • With flat push button
  • Packing: display box
READ MORE
Solution TBC 010

Crystic Solution TBC010 is a premium quality solution designed to enhance the curing process of unsaturated polyester resins and gelcoats. This reliable additive ensures optimal curing performance, improving the durability and finish of your composite materials. Ideal for a variety of industrial and artistic applications, Crystic Solution TBC010 guarantees consistent and high-quality results.

READ MORE
Spackle SetREAD MORE
Stainless Steel Scissors (200mm)READ MORE
Surface Tissue Mat

TCR Glass fiber surface mat is mainly used for the internal and external surface treatment of fiberglass products, making the surface smooth and flat. It can be used for saturated polyester resin, epoxy resin, phenolic resin, etc. This series of products is widely suitable for fiberglass manufacturing in processes such as winding and vacuum injection.

READ MORE
Tape Measure (5mx19)
  • Self lock function
  • ABS case covered with TPR
  • Comfortable holding feel and
  • impact resistant
  • Lock automatically, convenient to use.
READ MORE
Utility KnifeREAD MORE
VacPuc

Wireless Batteryless Pressure Sensor for the composite manufacturing industry.

- Measure pressure and temperature in the bag without piercing the bag.

- Pressure range 0 to 1200 mbar absolute

- Temperature rated up to 120°C/250°F

- Read with free App available for Android and iPhone

READ MORE
VacPuc Pouch 25 Pack

Pack of 25 Disposable VacPuc Pouches.

- Permeable to air, but not resin - protects your VacPuc during resin infusion processes.

READ MORE
Zellan
ZELLAN is a synthetic material for producing reliefs, ornaments and molded part of all kinds. It is a harmless & odourless acrylate in powder for the manufacture of porcelain imitations.
READ MORE