Showing 1–99 of 298 results
-
Out Of Stock
Alladin
R0.00 - R0.00 incl. VATSIZE: 150 x 775 mm
-
Out Of Stock
Allied Acetone A-Grade
R0.00 - R0.00 incl. VATAllied Acetone A-Grade solvent is highly effective for cleaning all resin based products such as laminating brushes, paddle rollers and all other fibreglass related tools, removing of uncured resin, thinning of paint, removing of wax build-up on GRP moulds and general cleaning where solvents are required. Do not use on plastic.
Please observe the health and safety data as Acetone is highly flammable.
-
Out Of Stock
Allied Acetone Refined
-
Out Of Stock
Allied Aerosil (Fumed Silica Thickener)
Allied Aerosil (Fumed Silica Thickener) is the thixotrope which makes the resin and gelcoat non drip, thixotropic resins will have between 0.75 – 1% by weight included in the formulation and gelcoats around 2.5% .
Its not that easy to disperse this without a mechanical stirrer – it will go in if you mix it in by hand but it wont develop its full effect if not well mixed.
-
Allied AF101 PA ORTHO – GP Laminating Resin
Allied AF101 PA ORTHO – GP Laminating Resin is a general purpose, rigid, medium reactivity, thixotropic, orthophthalic unsaturated polyester resin. Allied AF101 PA ORTHO is pre-accelerated and of medium cure rate. It has good toughness, is water resistant, as well as WRAS & Lloyds approved.
Allied AF101 PA ORTHO is designed for hand lay-up and spray applications. This resin is ideal for use in marine applications, automotive components and general industrial mouldings. -
Out Of Stock
Allied AF201 PA ISO – Marine Laminating Resin
Allied AF201 PA ISO – Marine Laminating Resin is a versatile, pre-accelerated, isophthalic, chemical and water reistant unsaturated polyester resin developed for manufacture of laminates for a wide range of critical applications where tough, high performance water and chemical resistant resin is required.
Allied AF201 PA ISO – Marine Laminating Resin is thixotropic and can be applied by brush or spray equipment and may be used in the pultrusion process for the production of profiled sections.
When fully cured, Allied AF201 PA ISO – Marine Laminating Resin is resistant to diesel fuel and other mildly corrosive chemicals. The low level of residual styrene of a fully cured laminate makes the resin especially suitable for the manufacture of food containers and other applications which require non-toxic, non-tainting laminates.
Allied AF201 PA ISO – Marine Laminating Resin can be used with confidence for the fabrication of chemical plant, tanks, pipes and containers.
Allied AF201 PA ISO – Marine Laminating Resin is also suitable for the fabrication of high performance boat hulls.
-
Allied AF301 PA VINYL ESTER – Laminating Resin
Allied AF301 PA VINYL ESTER – Laminating Resin is a high corrosion resistant, pre-accelerated epoxy-based vinyl ester resin. Allied AF301 PA VINYL ESTER – Laminating Resin exhibits excellent chemical resistance, offers good wet-out and has excellent gel time and stability. Complies with FDA regulation 21 CFR 177.2420. and DNV register approval for marine. It is the ideal resin to use on heated swimming pools.
-
Out Of Stock
Allied Aluminium Paddle Rollers
-
Out Of Stock
Allied Anti-Slip/Non-Slip Granulate
R0.00 - R0.00 incl. VATThese granules provide a non-slip surface for one component polyurethane paints. Often used with G4 & G8 Super to create a non-slip surface.
-
Out Of Stock
Allied Backing Pads
-
Out Of Stock
Allied Bonding Paste/Fibre Putty
Allied Bonding Paste/Fibre Putty is a filled, unsaturated polyester adhesive paste with a tenacious bond. It is non-sagging and can be used for filleting. The cured material has good adhesion to a variety of substrates including GRP, steel, aluminium, wood and brick. The bonding paste contains a blue catalyst colour change indicator. Once catalyst is added the blue colour of the indictor disappears to reveal the natural off-white colour of the bonding paste.
-
Out Of Stock
Allied Brushes (Chip Set – Blonde Hair)
R0.00 - R0.00 incl. VAT -
Out Of Stock
Allied Brushes (Fibreglass Blonde Hair)
-
Out Of Stock
Allied Brushes (Radiator – Blonde Hair)
R0.00 - R0.00 incl. VAT -
Out Of Stock
Allied Bubble Buster Rollers
-
Out Of Stock
Allied Carbon Fibre 3K Plain Weave 200GR
R0.00 - R0.00 incl. VAT -
Out Of Stock
Allied Carbon Fibre 3K Twill Weave 200GR
R0.00 - R0.00 incl. VAT -
Out Of Stock
Allied Carbon Fibre Uni-Directional 300GR
R0.00 - R0.00 incl. VAT -
Out Of Stock
Allied Carbon Fibre Uni-Directional Tape 50mm
R0.00 - R0.00 incl. VAT -
Out Of Stock
Allied Carpenters Pencil
R0.00 - R0.00 incl. VAT -
Out Of Stock
Allied Casting Resin (232PA) – Standard Casting Resin
A pre-accelerated rigid polyester resin designed for the manufacture of good colour laminates or castings. A great general purpose low viscosity casting resin that handles well with a high filler loading. It is fast curing for good production, readily pigmentable and is suitable for construction of thick laminates and castings due to it’s low exotherm.
-
Out Of Stock
Allied Casting Resin (Polylite 32032-20) – Ultra Clear Casting Resin
A low reactivity, orthophthalic, pre-accelerated, clear polyester casting resin suitable for numerous decorative casting applications, requiring good colour and high clarity. It may be used for embedding botanical and zoological specimens, as well as advertising exhibits. When fully cured it is a hard solid which can be sawed, drilled, sanded and polished to give a high quality surface finish. It is UV stabilized for improved weather resistance, acrylic modified to create the refractive index of glass and has a low viscosity for easier air release.
-
Out Of Stock
Allied Chalk Line Reel
R0.00 - R0.00 incl. VAT -
Out Of Stock
Allied China Marker / Wax Pencil
R0.00 - R0.00 incl. VAT -
Out Of Stock
Allied Chopped Strand Mat (CSM) 225g
-
Out Of Stock
Allied Chopped Strand Mat (CSM) 300g
-
Allied Chopped Strand Mat (CSM) 450g
-
Out Of Stock
Allied Chopped Strands (5-6mm)
-
Out Of Stock
Allied Clear Finishing/Wax Sanding Resin (237PA)
Allied Clear Finishing/Wax Sanding Resin (237PA) is a clear finishing, unsaturated polyester resin specifically designed for surfacing of surfboards/sailboards, boats and other applications. This resin will cure in the presence of air to a hard, tack-free and moisture resistant surface. Allied Clear Finishing/Wax Sanding Resin (237PA) is non air-inhibited, light stabilised and is a rigid, low reactivity, low viscosity pre-promoted resin for room temperature cure with Methyl Ethyl Ketone peroxide.
-
Out Of Stock
Allied Clear Surfboard Laminating Resin (235PA)
Allied Clear Surfboard Laminating Resin (235PA) is a low-reactivity, rigid, unsaturated polyester laminating resin designed for the manufacture of surfboards and sailboards. The resin is preaccelerated
and can be used in brush or spray applications. -
Out Of Stock
Allied Coremat 2mm
R0.00 - R0.00 incl. VAT -
Out Of Stock
Allied Coremat 4mm
R0.00 - R0.00 incl. VAT -
Out Of Stock
Allied Cotton Flock
-
Out Of Stock
Allied Cups 200ml
-
Out Of Stock
Allied Cups 500ml
-
Out Of Stock
Allied Dispensers (Measurers)
-
Out Of Stock
Allied Drop Sheets (Plastic)
-
Out Of Stock
Allied Dust Coveralls
R0.00 - R0.00 incl. VAT -
Out Of Stock
Allied Dust Masks FFP1
-
Out Of Stock
Allied E-Glass Cloth 10 OZ
-
Out Of Stock
Allied E-Glass Cloth 5 OZ
-
Out Of Stock
Allied E-Glass Cloth 6 OZ
-
Out Of Stock
Allied E-Glass Cloth Tape 6oz 100mm
-
Out Of Stock
Allied E-Glass Cloth Tape 6oz 25mm
-
Out Of Stock
Allied E-Glass Cloth Tape 6oz 50mm
-
Out Of Stock
Allied E-Glass Cloth Tape 6oz 75mm
-
Out Of Stock
Allied Ear Plugs
R0.00 - R0.00 incl. VAT -
Out Of Stock
Allied Extension Pole
-
Out Of Stock
Allied G4 Polyurethane Thinners
Allied G4 Polyurethane Thinners is used for G4 and G8 Super. It improves the flow and penetration of G4/G8 Super coatings. Polyurethane Thinners is also used as a cleaning agent for tools used to apply these materials.
-
Out Of Stock
Allied G4 Primer Bonding Agent & Sealant
-
Out Of Stock
Allied G8 Clear Polyurethane Sealant (UV Stable)
G8 PRIMER & SEALANT is a one component, practically non yellowing clear polyurethane coating for wood, metal and plastics that are resistant to solvents, as it contains solvents. However, it does not contain an additional UV light absorber. G8 PRIMER & SEALANT is applied in thin layers and hardens with moisture after the solvent is released. It has good resistance to all the usual chemicals and cleaners. The adhesion to wood, concrete and sanded polyester laminates is excellent, to metal and glass reasonable.
G8 PRIMER & SEALANT hardens rapidly. It is tack free after approx. 2 to 4 hours. The surface is highly impact resistant, tough and durable.
G8 PRIMER & SEALANT has a good resistance to weathering, hardly yellows and provides a long lasting gloss surface.
For full mechanical and chemical resistance it should be allowed to harden for, at least, 7 days at 20°C.
G8 PRIMER & SEALANT is chemically resistant against low concentrations of acids and alkalis at room temperature. -
Out Of Stock
Allied Gelcoat Clear (22PA/E)
Allied Gelcoat Clear (22PA/E) is an isophthalic, clear polyester gelcoat specially formulated to give excellent levelling and air release properties. The gelcoat is thixotropic and preaccelerated, with its viscosity and thixotropy having been optimised so that it flows evenly and sagging is minimised on inclined and vertical surfaces.
Allied Gelcoat Clear (22PA/E) is a resilient and impact-resistant gelcoat suitable for general mouldings where excellent durability and weather resistance are a requirement. The rheology of Allied Gelcoat Clear (22PA/E) ensures that it can be brush applied readily without the typical drag resistance and brush marks.
Allied Gelcoat Clear (22PA/E) is suitable for use on boat hulls that are subjected to long term immersion in water, and displays good resistance to a variety of chemical environments.
Allied Gelcoat Clear (22PA/E) can be pigmented with any of our Polyester Pigment pastes.
-
Out Of Stock
Allied Gelcoat White (22PA/E)
Allied Gelcoat White (22PA/E) is an isophthalic, durable white polyester gelcoat specially formulated to give excellent levelling and air release properties. The gelcoat is thixotropic and preaccelerated, with its viscosity and thixotropy having been optimised so that it flows evenly and sagging is minimised on inclined and vertical surfaces.
Allied Gelcoat White (22PA/E) is a resilient and impact-resistant gelcoat suitable for general mouldings where excellent durability and weather resistance are a requirement. The rheology of Allied Gelcoat White (22PA/E) ensures that it can be brush applied readily without the typical drag resistance and brush marks.
Allied Gelcoat White (22PA/E) is suitable for use on boat hulls that are subjected to long term immersion in water, and displays good resistance to a variety of chemical environments.
-
Out Of Stock
Allied Glass Bubbles (Q-Cell Lightweight Filler)
Allied Glass Bubbles (Q-Cell Lightweight Filler) is a lightweight filler that is compatible with Polyester and Epoxy Resins , it consists of hollow inorganic microspheres which have exceptional whiteness and low bulk density. It may be used a volume extender (Thickener) in resin, when adding to the resin 0.5% – 10% can be added which is dependant upon application, for pastes you can add up to 20%.
Allied Glass Bubbles (Q-Cell Lightweight Filler) dries white and is good for filling voids, etc, as it is very easy to sand. -
Out Of Stock
Allied Gloves ( Chemical Nitrile)
R0.00 - R0.00 incl. VAT -
Out Of Stock
Allied Gloves (Builders Industrial Black Rubber)
R0.00 - R0.00 incl. VAT -
Out Of Stock
Allied Gloves Latex (Surgical)
R0.00 - R0.00 incl. VAT -
Out Of Stock
Allied Gloves Latex (Yellow)
R0.00 - R0.00 incl. VAT -
Out Of Stock
Allied GP (Terephthalic) Resin (362PAS)
Allied GP (Terephthalic) Resin (362PAS) is a rigid, medium reactivity, thixotropic, terephthalic unsaturated polyester resin. Allied GP (Terephthalic) Resin (362PAS) is pre-accelerated and of medium cure rate.
Allied GP (Terephthalic) Resin (362PAS) is designed for hand lay-up and spray applications. This resin is ideal for use in marine applications, automotive components and general industrial mouldings. -
Out Of Stock
Allied Grinding & Cutting Disks
-
Out Of Stock
Allied Knee Pads
R0.00 - R0.00 incl. VAT -
Out Of Stock
Allied Laquer Thinners A-Grade
Allied Laquer Thinners A-Grade is a superior quality, multipurpose solvent blend specially formulated to dilute lacquer based paints, as well as to clean brushes, rollers and tools in general.
-
Out Of Stock
Allied Latex Liquid Rubber
-
Out Of Stock
Allied Masking Tape (80°C Heat Resistant)
-
Out Of Stock
Allied MEKP/HARDENER/CATALYST – Slow Cure
MEKP (Methyl Ethyl Ketone Peroxide) Catalyst for polyester and vinylester resin as well as gelcoat and topcoat systems. This MEKP is used particularly in the warmer months of the year when your resin naturally sets off quicker, or when a longer gel time is required.
MEKP Catalyst is typically used as a polyester resin catalyst, fibreglass catalyst or vinylester resin catalyst at a ratio of between 1 and 3%, according to the pot-life and cure speed required and the ambient temperature.
Always follow the guidelines that accompany your specific resin system.
-
Out Of Stock
Allied MEKP/HARDENER/CATALYST – Standard Cure
MEKP (Methyl Ethyl Ketone Peroxide) Catalyst for polyester and vinylester resin as well as gelcoat and topcoat systems.
MEKP Catalyst is typically used as a polyester resin catalyst, fibreglass catalyst or vinylester resin catalyst at a ratio of between 1 and 3%, according to the pot-life and cure speed required and the ambient temperature.
Always follow the guidelines that accompany your specific resin system.
-
Out Of Stock
Allied Micro Talc Powder
R0.00 - R0.00 incl. VAT -
Out Of Stock
Allied Microballoons (Cenolite/E-Spheres)
-
Out Of Stock
Allied Milfibre
-
Out Of Stock
Allied Mixer Heavy Duty
R0.00 - R0.00 incl. VAT -
Out Of Stock
Allied Mixer Light Duty
R0.00 - R0.00 incl. VAT -
Out Of Stock
Allied Mixer Stainless Steel 316 (Small)
R0.00 - R0.00 incl. VAT -
Out Of Stock
Allied Opaque Pigment Paste
Allied Opaque Pigment Pastes are all of the highest quality and manufactured using stable, colourfast and lightfast pigments. Please refer to the pigment loading percentages as a guideline only for Allied Poolcoat & Topcoat Clear/Natural – ISO NPG (73PA/E) as well as Allied Gelcoat Clear (22PA/E) . These can be found on the Colour Chart, next to the name of the colour. The pigment loading for resin is usually a maximum of 5%.
*Please note that this colour chart only serves as a general guide for colours available and cannot be used to determine exact matches. It is strongly suggested that you visit us in store to collect a colour swatch to match more accurately.
-
Out Of Stock
Allied Paint Trays
-
Out Of Stock
Allied Pigment Powder
-
Out Of Stock
Allied Plaster of Paris
-
Out Of Stock
Allied Plasticiser
Allied Plasticiser is a highly flexible, unsaturated polyester resin which does not contain any monomers and is non-accelerated.
Allied Plasticiser is used for blending with polyester resins as a plasticizer to improve the resiliency and resistance to impact and shock and being 100% solid it also reduces the shrinkage of the finished part.
-
Out Of Stock
Allied Poolcoat & Topcoat Cape Grey – ISO NPG (73PA/E)
Allied Poolcoat & Topcoat Cape Grey – ISO NPG (73PA/E) is a Cape Grey pre-accelerated, thixotropic unsaturated polyester high performance surface coat based on Isohthalic Acid and Neopentyl Glycol designed for use as a protective, decorative layer directly onto the glass reinforced laminate layers in the relining and repair of swimming pools.
-
Out Of Stock
Allied Poolcoat & Topcoat Clear/Natural – ISO NPG (73PA/E)
Allied Poolcoat & Topcoat Clear/Natural – ISO NPG (73PA/E) is a Clear pre-accelerated, thixotropic unsaturated polyester high performance surface coat based on Isohthalic Acid and Neopentyl Glycol designed for use as a protective, decorative layer directly onto the glass reinforced laminate layers in the relining and repair of swimming pools. It can be pigmented with any of the Allied Opaque / Translucent Pigment Pastes. Please refer to the pigment loading percentages as a guideline, these can be found on the colour chart.
-
Out Of Stock
Allied Poolcoat & Topcoat Pool Blue – ISO NPG (73PA/E)
Allied Poolcoat & Topcoat Pool Blue – ISO NPG (73PA/E) is a Pool Blue pre-accelerated, thixotropic unsaturated polyester high performance surface coat based on Isohthalic Acid and Neopentyl Glycol designed for use as a protective, decorative layer directly onto the glass reinforced laminate layers in the relining and repair of swimming pools.
-
Out Of Stock
Allied Poolcoat & Topcoat White – ISO NPG (73PA/E)
Allied Poolcoat & Topcoat White – ISO NPG (73PA/E) is a White pre-accelerated, thixotropic unsaturated polyester high performance surface coat based on Isohthalic Acid and Neopentyl Glycol designed for use as a protective, decorative layer directly onto the glass reinforced laminate layers in the relining and repair of swimming pools.
-
Out Of Stock
Allied Pregel (PA)
Allied Pregel (PA) has been specially formulated for use as a thixotropic additive in polyester resins. Allied Pregel (PA) is a pink, preaccelerated highly thixotropic paste which when used in polyester resin confers thixotropic properties for use in laminating or gelcoat applications. Resins with sufficient amounts of Allied Pregel (PA) can be applied to vertical or inclined surfaces with minimal drainage. Being a highly thixotropic, clear paste, Allied Pregel (PA) can be used in general bonding applications.
-
Out Of Stock
Allied PU Foam Spray
R0.00 - R0.00 incl. VAT -
Out Of Stock
Allied PU Foam- Two Part (A+B Set)
-
Out Of Stock
Allied PVA Release
R0.00 - R0.00 incl. VATAllied PVA Release is a red water based solution of polyvinyl alcohol. It is specially formulated to form a continuous film when applied to a waxed mould surface, providing excellent release properties for polyester resins.
-
Out Of Stock
Allied Rags (Colour Mixed)
-
Out Of Stock
Allied Rags (White)
-
Out Of Stock
Allied RAMWAX Run-In
R0.00 - R0.00 incl. VATAllied RAMWAX Run-In is a blend of carnuba and other high grade waxes suitable for use with PVA.
Allied RAMWAX Run-In is used in mould preparation and release systems for hand laminating and cold press moulding.
-
Out Of Stock
Allied RAMWAX Silicone Release
R0.00 - R0.00 incl. VATAllied RAMWAX Silicone Release is a blend of carnuba wax and silicone for multiple releases.
Allied RAMWAX Silicone Release is used in mould preparation and release systems for hand laminating and cold press moulding.
-
Out Of Stock
Allied Respirator Mask
R0.00 - R0.00 incl. VAT -
Out Of Stock
Allied Roller CMPLT Long Pile/Fluffy
-
Out Of Stock
Allied Roller CMPLT Microfibre/Perlon Mini
R0.00 - R0.00 incl. VAT -
Out Of Stock
Allied Roller CMPLT Mohair Mini
R0.00 - R0.00 incl. VAT -
Out Of Stock
Allied Roller CMPLT Short Pile / Mohair
-
Out Of Stock
Allied Roller CMPLT Sponge Mini
R0.00 - R0.00 incl. VAT -
Out Of Stock
Allied Roller Corner
R0.00 - R0.00 incl. VAT -
Out Of Stock
Allied Roller Handles
-
Out Of Stock
Allied Roller Plastic Paddle
R0.00 - R0.00 incl. VAT -
Out Of Stock
Allied Roller Refill Microfibre/Perlon Mini
R0.00 - R0.00 incl. VAT
